Our double sided presses are distinguished by their robust and reliable workmanship. Thanks to rigid constructions and robust guidance assemblies, the machines are also able to carry out processes where great precision requirements are to be met.
As the machine concept is flexible and versatile, the presses can be used for many different applications. Each machine can be individually adapted to its designated task. Depending on the application, single-acting, double-acting or multiple-acting presses are used. Different versions and equipment are provided accordingly.
The presses can be used for manual loading and for fully automatic processes or as transfer press.
Further information can be found under the heading Four-column presses that represent a special form of the double sided press.
Hydraulic double sided press RZP 320.21 S:
- Long, adjustable eightfold guidance assemblies with hardened, precision ground guide rails on the frame and with wear-resistant bronze strips on the ram
- Low noise level thanks to separate pump chamber
- Mechanical stroke limitation
- Hydraulic snap-through dampening (4-fold)
- Ram parallel holding system over the 4 snap-through dampening cylinders
- Hydraulic quick-acting tool clamping device
- Hydraulic roller strips for tool change
- Program control
- For automatic operation with robot and for manual loading operation
Hydraulic double sided press RZP 160.21 S:
- automatic operation with conveyor system
- with long, adjustable eightfold guidance
- with automatic lubricating system
- with hydraulic snap-through dampening
- with mechanical stroke limitation
- with tool control
- with hydraulic quick-acting tool clamping device
- with hydraulic cutter
Hydraulic double sided press RZP 180.21 S:
- Ram guidance through roller guides
- Low noise level
- Mechanical stroke limitation
- Hydraulic snap-through dampening
- With integrated tool protection and triggering of tool and transfer functions
- For automatic operation and for manual loading operation
Hydraulic double sided press RZP 100.21 S:
- Long, adjustable eightfold guidance assemblies with hardened, precision ground guide rails on the frame and with wear-resistant bronze strips on the ram
- Low noise level thanks to separate pump chamber
- Mechanical stroke limitation
- Hydraulic snap-through dampening (4-fold)
- Hydraulic quick-acting tool clamping device
- With integrated tool protection and triggering of tool and transfer functions
- For automatic operation with robot and for manual loading operation
Hydraulic frame press RZP 600.21 SSZ:
- For hot and cold work
- Eightfold guidance assemblies
- High working speed
- Hydraulic drawing pad
- Mechanical stroke limitation
- Hydraulic snap-through dampening (4-fold)
- Sensitive hand lever control for straightening work
- Hydraulic quick-acting tool clamping device
- Hydraulic roller strips
Hydraulic double sided press REP 63.21 SZ:
- Ram guidance through roller guides
- Hydraulic drawing pad
- Hydraulic snap-through dampening
- Mechanical stroke limitation
- Low noise level thanks to separate pump chamber
- Hydraulic quick-acting tool clamping device
- With handling system for fully automatic production
- Program control for preselecting positions, speeds, forces, force holding time, position and force dependent changeover, degressive or progressive force behaviour, set value definitions, transfer system, etc.; display of forces, positions, status and failure messages, program memory for saving all parameters under a tool number for fast retooling of the press
Hydraulic double sided press RZP 500.21 S:
- Adjustable eightfold guidance assemblies with hardened, precision ground guide rails on the frame and wear-resistant bronze strips on the ram
- High working speed
- Hydraulic snap-through dampening
- Mechanical stroke limitation
- Hydraulic quick-acting tool clamping device
- Hydraulic roller strips for tool change
- With Röcher rapid-cycle roll feed RWV 400-8, with three-phase servodrive, lateral guide rollers and roller basket, with hydraulic ventilation control, electromotive height adjustment, for strip widths of up to 400 mm, for strip thicknesses of up to 8 mm, for strip cross sections of up to 3200 mm²
- With roller conveyor table for transferring the forward end of the strip from the straightening machine to the roll fed
- With Röcher 9 roll straightening machine, with loop control, strip insertion device
- With mobile expanding mandrel decoiler RSH 8-400 for a strip weight of up to 5 tons, with hydraulic expanding mandrel and hydraulic strip lifter
Double-sided press RZP 1200.21 N
Hydraulic double sided press RZP 250.22 N:
- With robust round guidance assemblies